MotorGuide Stainless Steel
Trolling Motor Shaft
Specs:
Length: 60"
Outer Diameter: 1"
(Threaded on both ends of shaft)
For Use With:
-Motor Guide Foot Control Models
w/ Threaded Pinion Gear.
(Note: If your pinion gear is held on with Rivets,
this is not the correct shaft)
Tips from the Tech:
Clean lower unit threads of any loose debris.
Apply Red Loctite 271 on shaft threads when installing.
Supersession: MAF04914, MAF049145, MAF04914A,
MAF04914E