MotorGuide Stainless Steel
Trolling Motor Shaft
Outer Diameter: 1"
(Threaded on both ends of shaft)
For Use With:
-Motor Guide Foot Control Models
w/ Threaded Pinion Gear.
(Note: If your pinion gear is held on with Rivets,
this is not the correct shaft)
Tips from the Tech:
Clean lower unit threads of any loose debris.
Apply Red Loctite 271 on shaft threads when installing.
Supersession: MAF04912, MDF04905, MDF04905, MAF04916
MAF049165, MAF04916E, 834736E, MAF04911, MAF049115,
MAF04911A, MAF04911E, MAF049125, MAF04912A, MAF04912E,
MAF04915, MAF049155, MAF04915E, MAF04922
Posted by Jonathan Ward on Jul 21st 2020
Got what I expected, when I expected.
Posted by Steve on Apr 11th 2020
I ordered this shaft to tell place the one I bent. The item was delivered very quick. Exactly as expected. Very good place to deal with
Posted by Stan Whitaker on Feb 27th 2020
Ordered stainless steel shaft but was unsure if it was the correct one. With the assistance of whoever does your 'help' emails, the correct one was ordered, delivered, and installed. Thanks for your help.
Posted by Scott Lesko on Oct 2nd 2018
Was a little worried about this one, box was destroyed on one end by UPS, even smashed the fragile sticker shipper put in box